Straight Radiator Valve
Your Professional Straight Radiator Valve Supplier
DINRO is a professional manufacturer and exporter of HVAC system components and brass valves, dedicated to the research, development, production, sales, and service of HVAC system components and brass valves. We specialize in the design, manufacturing, and sales of HVAC systems, valves, water manifolds, pipe fittings, sanitary ware, and other related products. We have 10 years of experience in the international market, with business operations spanning numerous countries including the UK, Germany, the Netherlands, Russia, Ukraine, Poland, and Argentina.
Straight radiator valves, also known as straight-through valves, provide a direct and uninterrupted flow of hot water into your radiator. These valves are ideal when your pipework runs directly up from the floor and connects to the bottom of the radiator. They create a streamlined, unobstructed appearance, making them a popular choice for modern and minimalist interiors.
Product parameters
|
Size |
1/2" |
|
Material |
Brass hpb57-3 |
|
Nominal pressure |
≤10 bar |
|
Applicable medium |
Cold and hot water |
|
Working temperature |
T≤100℃ |
|
Thermostatic connection thread |
M30*1.5 |
|
Control temperature |
6~28℃ |
Premium Material:
Manufactured from high-quality CW617N brass and 58-3 brass, ensuring excellent durability, corrosion resistance, and long-term reliability.
Wide Temperature Range:
Suitable for use in temperatures from -20°C to +120°C, making it ideal for various environments and applications.
Sample Support:
Our factory provides sample units upon request, allowing you to evaluate quality and compatibility before bulk orders.
• Ruggedly-constructed cast bronze
• Pack-less design
• Fully open/close in one turn
• Bronze metal-flex sealing disks
• Leak proof sealing/design
• Larger sized and heat resistant wheel handle
• Non-rising stem
• Excellent choice for one or two pipe system
Manufacturing Components of Straight Radiator Valve
Controlling the amount of hot water that flows through radiators is the primary function of both thermostatic and manual radiator valves.
Thermostatic head
Head signifies the valve’s knob for adjusting the temperature. This head allows for easy adjustment of the valve’s degree. This head may also include temperature sensors in some versions. Within the plastic valve, the head is where you’ll find the liquid sensor. Verify the connection points before installing the valve head.
Valve mechanisms
TRV and manual radiator valve mechanisms are developed differently. The mechanism that permits TRVs to react to changes in temperature is more sophisticated than that of manual valves, which are operated manually.
Stem
Some TRVs have a spindle that transfers motion from the thermostatic head to the valve mechanism. Typically, a temperature-responsive component is unnecessary for the spindle to be operated directly by hand in manual valves.
Knob
To manually change the water flow, one may use a wheel or knob on a manual radiator valve. Because TRVs automatically adjust the water flow based on the ambient temperature, they do not need this component. Radiator valves share common replacement parts: gaskets, packing, O-rings, and retaining nuts or bonnets.
Size Guide About The Straight Radiator Valve
15 mm Valves
A 15mm valve should be fine for radiators in most homes since it is the average pipe size in the UK. However, you should double-check because there is a spectrum of sizes.
10mm Valves
While 10mm pipes throughout a home are uncommon, these valves might be required to connect a single radiator to your current heating system.
22 mm Valves
You may need to install larger pipes in a bathroom, as they enable a greater flow of water from the hot water tank, which is useful when a radiator’s location needs a higher water pressure.
8 mm Valves
Microbore pipes, popular for homes constructed in the middle to late 20th century, use 8mm valves and are, unfortunately, more prone to obstructions and pipe kinks.
Our Certificate
FAQ